Connecting to Wi-Fi via WPS

JOIN WITH WPS

Follow the instructions below:

1. Press the Menu button to open the menu. FAN MODE is displayed.
2. Press the down button until > NETWORK is displayed.
3. Press the Mode button to enter the NETWORK menu. WPS NOW is displayed.
4. Press the Mode button again to start WPS. WPS ON is displayed.
5. Press the WPS button on your router. After about 30 seconds, the menu should countdown RESTART 10, 9, 8...
6. The thermostat should now be joined to your Wi-Fi network*. You can verify the network name with the NETWORK / SSID 

Note:

If you haven't already, please register and log into the Thermostat Installation Manager at https://home.thesimple.com/install/